Hi,

We have two offices seperated by to 10Mb LES links we run a pure VOIP environment and need to ensure that voice traffic is kept optimised across these links.

class-map match-any L3L2-VoiceRTP

match ip precedence 1

match access-group name VoiceRTP

class-map match-any L3L2-VoiceControl

match ip precedence 2

match access-group name VoiceControl

!

!

policy-map QoS-POLICY-10MB

class L3L2-VoiceRTP

priority 1888

class L3L2-VoiceControl

priority 768

policy-map Shape-POLICY

class class-default

shape average 10240000 2560000

service-policy QoS-POLICY-10MB

interface FastEthernet0/1

ip address xxx.xxx.xxx.xxx 255.255.255.252

ip nbar protocol-discovery

service-policy output Shape-POLICY

ip route-cache flow

speed 100

full-duplex

VoiP packets are genrally marked as IP prcedence 5 or DSCP EF

Control traffic is marked as CS3

Please have the class-maps configured as follows

class-map match-any L3L2-VoiceRTP

match ip precedence 5 or match ip dscp EF

match access-group name VoiceRTP

class-map match-any L3L2-VoiceControl

match ip precedence 3 or match ip dscp cs3

match access-group name VoiceControl

ip access-list extended VoiceRTP

permit udp any any eq 16384 32767

you can also use match ip rtp 16384 16383

I have also found you using NBAR which drives to define the classmaps using the match protocol command

"match protocol rtp "

This is CPU intensive and hence better to be cautious before configuring it

HTH, rate if it does

Narayan