04-24-2007 09:37 AM - edited 03-17-2019 09:00 PM
Hi,
I purchased couple of 3640's, NM-2V and VIC-FXS cards.
I could not get the Voice cards recognized on the Routers (3640 with c3640-i-mz.122-11.T.bin)
Below is the output of "sh diag"
Slot 1:
Unknown (type 101) Port adapter
Port adapter is disabled
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware revision 1.1 Board revision D0
Serial number 14706627 Part number 800-02491-02
FRU Part Number: NM-2V=
Test history 0x0 RMA number 00-00-00
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 65 01 01 00 E0 67 C3 50 09 BB 02 00 00 00 00
0x30: 68 00 00 00 99 06 16 17 FF FF FF FF FF FF FF FF
What might be the cause?
Thank you in advance,
Oguz Can
04-24-2007 02:29 PM
Hi Oguz,
You have to use an image on the 3640 that supports the ip plus feature set.
The image you're using:
c3640-i-mz.122-11.T.bin
only supports the IP feature set, as indicated in the filename "c3640-i...", an "ip plus" image will be named "c3640-is..."
Hope this helps, and please rate.
-Joe
04-25-2007 11:58 AM
Hi Joe,
Thanks for your answer. I installed IP Plus image and it is resolved,
PS: I rated your answer.
Regards,
Oguz Can
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: