WIC-1DSU-T1-V2 for Long Distance in MGCP Gateway

Answered Question
Apr 24th, 2007
User Badges:

I want to use a WIC-1DSU-T1-V2 to terminate a long distance T1 in an MGCP gateway. When I am setting the gateway up in CallManager, there is no option for this module. Which module should I choose?

Correct Answer by Paolo Bevilacqua about 9 years 11 months ago

You need another of the same module. Also VWIC2-xx-xx are now available and would provide same or better functionality.

You also need to check how many DSP do you have (do show diag to know), likely you have pvdm-16, that is not enough for 2 T1s, so you will need another PVDM-32 to be safe.


I suggest that you ask this long distance T1 to be provisioned as PRI as well so you will have all the features and ease of configuration and maintenance.


Hopes this helps, if so please rate post!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Paolo Bevilacqua Tue, 04/24/2007 - 11:19
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi, that card is data only and cannot be used for voice. The module to use, depends on the router, what do you have ?

lhiatt Tue, 04/24/2007 - 11:20
User Badges:

It is a 2811. I am using a VWIC-1MFT-T1\E1 for the PRI

Correct Answer
Paolo Bevilacqua Tue, 04/24/2007 - 11:33
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You need another of the same module. Also VWIC2-xx-xx are now available and would provide same or better functionality.

You also need to check how many DSP do you have (do show diag to know), likely you have pvdm-16, that is not enough for 2 T1s, so you will need another PVDM-32 to be safe.


I suggest that you ask this long distance T1 to be provisioned as PRI as well so you will have all the features and ease of configuration and maintenance.


Hopes this helps, if so please rate post!

Actions

This Discussion