User's greeting not playing we sent to voice mail

Unanswered Question
Apr 24th, 2007
User Badges:

I have a very strange problem. We have some users who prior to today had a Unity voice mail account with an Avaya phone and using PIMG. We cut them over to a Cisco phone today and when someone calls them from the PSTN they don't hear the users greeting, however I can see the call come in and connect and if I leave a message they will get it, now if an internal users calls (another IP Phone) they have no problem. I did change the switch to now point to Call Manager but stills does not work.

Any thoughts!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
thisisshanky Tue, 04/24/2007 - 12:13
User Badges:
  • Purple, 4500 points or more

You may use Port status monitor to troubleshoot what Unity is doing when the call gets to Unity.

tony.hanson Tue, 04/24/2007 - 12:34
User Badges:

I went into Port status monitor and this is what it said:

State - Play Greeting

Call answered if needed

Playing greeting for Subscriber: Jane Doe

No DTMF received

Taking message for Subscriber: Jane Doe

Event is [RecordMsgEvent]

State - Record Message

Event is [HangupEvent]

Now If I leave a message right away she will get it, it's not playing her greeting message

eschulz Tue, 04/24/2007 - 12:58
User Badges:
  • Cisco Employee,

Sounds like maybe you are having a one-way audio problem between Unity and your gateway. Do you hear any audio from Unity during this call? (e.g. if you press # to end the recording you should hear after message menu options)

tony.hanson Tue, 04/24/2007 - 13:08
User Badges:

I do not hear anything from Unity even when I press the # key. The Unity server is at another location, but it worked with the same gateway prior to today. The only thing that's changed today is that we moved them from an Avaya phone to an IP phone. Now I didn't mention one thing, the customer still has the T1 Pri going through his Avaya system until we finish the other sites.


This Discussion