04-24-2007 12:24 PM - edited 07-03-2021 01:59 PM
I've got a HWIC-AP-G-A module in my 2821 that is not broadcasting the ssid to employee's. I've read the Cisco Wireless ISR and HWIC Access Point
Configuration Guide but have not been able to find anything about broadcasting the ssid to users. Can someone give me a hint on adding this function?
Solved! Go to Solution.
04-24-2007 01:11 PM
Hi Darron,
In order to enable guest mode (Broadcast SSID) on an SSID, type this command on the AP in global configuration mode:
Ap
Ap
From this doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a008009483e.shtml
Hope this helps!
Rob
04-24-2007 01:11 PM
Hi Darron,
In order to enable guest mode (Broadcast SSID) on an SSID, type this command on the AP in global configuration mode:
Ap
Ap
From this doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a008009483e.shtml
Hope this helps!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: