jreekers Tue, 04/24/2007 - 20:20
User Badges:
  • Cisco Employee,

Hi.


I believe this is what you need:


.1.3.6.1.4.1.14179.2.1.1.1.38.2

bsnDot11EssNumberOfMobileStations OBJECT-TYPE

-- FROM AIRESPACE-WIRELESS-MIB

SYNTAX Counter

MAX-ACCESS read-only

STATUS Current

DESCRIPTION "No of Mobile Stations currently associated with the WLAN."

::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) airespace(14179) bsnWireless(2) bsnEss(1) bsnDot11EssTable(1) bsnDot11EssEntry(1) bsnDot11EssNumberOfMobileStations(38) 2 }


Hope this answers your question.


-Joe

ericgarnel Wed, 04/25/2007 - 05:20
User Badges:
  • Gold, 750 points or more

I am able to get some numbers back using this OID in an snmpwalk, but is this OID for all wlans, or just one of them?

jreekers Wed, 04/25/2007 - 08:34
User Badges:
  • Cisco Employee,

Can you please show me what the output of your snmpwalk looks like?


Thanks,

-Joe

ericgarnel Wed, 04/25/2007 - 08:44
User Badges:
  • Gold, 750 points or more

snmpwalk -c My-community -v 2c a-4402-controller .1.3.6.1.4.1.14179.2.1.1.1.38.2

SNMPv2-SMI::enterprises.14179.2.1.1.1.38.2 = Counter32: 9


jreekers Wed, 04/25/2007 - 09:16
User Badges:
  • Cisco Employee,

Based on the results of your walk, I would say it's reports all of the instances on that particular controller...and I say this because only one instance is reported. I would think that if you have multiple WLANS on that WLC, you would get multiple instances reported back, so, (maybe, like you) I'm confused by the description in the MIB object where it states:


"No of Mobile Stations currently associated with the WLAN."


which to me looks like "the WLAN" is used in the singular.


At this point, I think the best thing to do would be to open a TAC case with all of this info, and we can get with our developers for confirmation.


Hope this has been somewhat helpful, and please rate these posts.


Thanks,

-Joe


Actions

This Discussion

 

 

Trending Topics - Security & Network