Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
216
Views
0
Helpful
1
Replies

VLANs at 3750 stacked switches

nagabhushanamj
Level 1
Level 1

‎04-24-2007 09:57 PM - edited ‎03-05-2019 03:39 PM

Hi

We have 2number of 3750 sw's acting as core(think 1core-DATA, 2core-VOICE) and stacked. There are 5 switches are cascaded to core1 and 1 switch for core2. You consider this is for 1 floor, the same setup is coming from other floor to Core1 & Core2. Can any one suggest, whether we can able to configure VLAN's since 2 cores are stacked.

Regards

Naga

Labels:
0 Helpful
1 Reply 1

Amit Singh
Cisco Employee
Cisco Employee

‎04-24-2007 10:06 PM

Naga,

You should be able to configure Vlans without any problems. You can configure on one of the switch as VTP server and rest all the switches VTP client. The moment you configure the Vlans on VTP server, they will be propogated to the client switches.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12235se/scg/swvtp.htm#wp1288811

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12235se/scg/swstack.htm#

HTH,Please rate if it does.

-amit singh

0 Helpful
Customers Also Viewed These Support Documents
Review Cisco Networking products for a $25 gift card