Cisco VPN Client Sateful Firewall and Exchange

Unanswered Question
Apr 25th, 2007
User Badges:

Has anyone else run into the issue where if the Client stateful firewall is checked, messages hang in the Outbox of the Exchange client?


Below is the log:

29 10:07:36.957 04/25/07 Sev=Info/4 FIREWALL/0x63A00003

BLOCK: UDP <EXCH IP>:37255 to <PC IP>:1163

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
amritpatek Wed, 05/02/2007 - 05:22
User Badges:
  • Silver, 250 points or more

Check if following is configured. Under the Configuration | User Management | Base Group | Client FW Parameters Tab choose

'Firewall Required', then select Cisco Integrated Client Firewall. You would then specify the filter you want to use for the client. This uses the Policy Pushed(CPP)feature. Following link may help you

http://www.cisco.com/univercd/cc/td/doc/product/vpn/client/rel4_0/admin_gd/vcach1.htm#1151504

Actions

This Discussion