cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
565
Views
0
Helpful
1
Replies

how to troubleshoot pix with the <sackOK>?

cindylee27
Level 1
Level 1

Hi,

I have a problem on connecting to the server from one pc client end. The access list and static already been applied. The capture log shows below:

17:28:17.846101 129.1.16.121.4280 > 10.30.6.142.81: S 1745184384:1745184384(0) win 65535 <mss 1460,nop,nop,sackOK>

17:28:17.846422 10.30.6.142.81 > 129.1.16.121.4280: R 0:0(0) ack 1745184385 win 65535 <mss 1460,nop,nop,sackOK>

17:28:18.257387 119.1.16.121.4280 > 10.10.10.142.81: S 1745184384:1745184384(0) win 65535 <mss 1460,nop,nop,sackOK>

17:28:18.257677 10.10.10.142.81 > 119.1.16.121.4280: R 0:0(0) ack 1745184385 win 65535 <mss 1460,nop,nop,sackOK>

17:28:18.759070 119.1.16.121.4280 > 10.10.10.142.81: S 1745184384:1745184384(0) win 65535 <mss 1460,nop,nop,sackOK>

Please assist what could be the problem on this connection. I can do a ping to the server by granting the icmp request at access-list.

Thanks again.

CIndy

1 Reply 1

Jon Marshall
Hall of Fame
Hall of Fame

Hi Cindy

You are getting a Reset back from the server on port 81. Can you confirm that there is a service running on this port ie. telnet to that port from a machine on the same subnet.

Could you also post the static and access-list information from the pix.

Jon

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: