mohammedmahmoud Thu, 04/26/2007 - 04:50
User Badges:
  • Green, 3000 points or more

Hi there,

Try "show logging", but note for the logging buffer if you are locally logging.

HTH, please rate if it does help,

Mohammed Mahmoud.

peterledwidge Thu, 04/26/2007 - 05:30
User Badges:

I'd agree with show log.

You could also try sh int fax (see line 7 "Last input")

Same for serial links also.

FastEthernet0/x is down, line protocol is down

Hardware is Fast Ethernet, address is 0030.1942.d458 (bia 0030.1942.d458)

MTU 1500 bytes, BW 0 Kbit, DLY 100 usec, rely 255/255, load 1/255

Encapsulation ARPA, loopback not set, keepalive not set

Duplex setting unknown, Unknown Speed, 100BaseTX/FX

ARP type: ARPA, ARP Timeout 04:00:00

Last input never, output never, output hang never

Last clearing of "show interface" counters never

Queueing strategy: fifo


mohammedmahmoud Thu, 04/26/2007 - 05:44
User Badges:
  • Green, 3000 points or more


Forgot to say that if it was a subinterface, you'll need to add the following command

Switch(config-if)#logging event subif-link-status


Mohammed Mahmoud.


This Discussion