DHCP problem using Leap and TKIP with Cisco ACS

Unanswered Question
Apr 26th, 2007

I have set up a lab environment using a Cisco 1231 access point authenticating with Cisco ACS 3.2. The security settings are for LEAP authentication with TKIP and WPA. I can connect with it and see that authentication is passed on the ACS. I do not receive an ip address. I am obviously doing something stupid but cannot find it. Any ideas would be great.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
psion Thu, 04/26/2007 - 10:10

Have you tried configuring LEAP with a Local Radius server on the AP to see what happens?

mbluemel Thu, 04/26/2007 - 23:31

Although I havent tried it using the local radius server on the access point I actually had this working a fortnight ago on the same access point. The only difference is the ACS is on a different server now.


This Discussion



Trending Topics - Security & Network