pix 515E can't use the Fe0 and Fe1

Unanswered Question
Apr 26th, 2007
User Badges:

Dear sirs,

i have cisco pix 515E with three interfaces Fastethernet0, Fastethernet1 and built-in in the pix and Fastethernet2 which is module.

i upgrade it to ver. 7.0

when i connect the firewall the fe0 and Fe1 is bring up and the light is ok but i can ping them or use them , but the interface Fe2 which module is ok i can ping it or use it.

Is it hardware failure or what.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
abdo2000a Thu, 04/26/2007 - 06:27
User Badges:


i mean i can not ping or use the Fe0 or Fe1, but i can use and ping the Fe2.

i use simple configuration on the pix ( inside , outside and Dmz).


This Discussion