cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
297
Views
0
Helpful
1
Replies

pix 515E can't use the Fe0 and Fe1

abdo2000a
Level 1
Level 1

Dear sirs,

i have cisco pix 515E with three interfaces Fastethernet0, Fastethernet1 and built-in in the pix and Fastethernet2 which is module.

i upgrade it to ver. 7.0

when i connect the firewall the fe0 and Fe1 is bring up and the light is ok but i can ping them or use them , but the interface Fe2 which module is ok i can ping it or use it.

Is it hardware failure or what.

1 Reply 1

abdo2000a
Level 1
Level 1

sorry,

i mean i can not ping or use the Fe0 or Fe1, but i can use and ping the Fe2.

i use simple configuration on the pix ( inside , outside and Dmz).

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: