I'm in a situation where h323 is already implemented with ccm4.1, the voice gateway is also installed with 16 analog lines, and my question is:
Can I assign an analog line for ex. phone no. 405 3332 will ring in a certain IP Phone(connection plar) and when I dial from that phone it will goes through that line number.
You can achieve the first goal with connection-plar configuration under the voice-port(4053332).
connection-plar XXXX(extension of the ip phone)
To achieve the second goal; you should form a new special partition and calling search space for the ip phone. Then, you should form route-patterns for the new partion and put a prefix (for example 9) for route-pattern. Then erase the 9 with a translation-pattern at the router.
You should change the cealling search space of the ip phone with the new one.
I hope i explained well:) I tried it, it works..