paolo bevilacqua Thu, 04/26/2007 - 11:07
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi,


Your config appears correct. Few things you could try


- specify codec g711u instead of A, even if you're in Europe

- try the values set the following doc:

http://www.cisco.com/en/US/partner/products/hw/gatecont/ps514/products_administration_guide_chapter09186a00800c4d1e.html

- Limit speed of you fax machines to 9600 or 7200 bps if possible.


I know it is not a consolation, but I have an installation where they hace incompete faxes going from FXS port to PRI. Go figure!


Hope this helps, if so please rate post!

Actions

This Discussion