scp through ipsec tunnel slow then stalls

Unanswered Question
Apr 26th, 2007
User Badges:

I have a asa5510 and when I scp from the VPN client to an inside server the transfer starts and slowly drops in speed until I see a stalled message.


Everywhere I read suggests it is the df-bit problem. I tried to set the df-bit to clear globally with:


crypto ipsec df-bit clear


However, the asa5510 v7.1(2) software apparently requires an interface spec so I have to do a:


crypto ipsec df-bit clear outside


I have to do this on all the interfaces. Is there a way to do this globally AND is this really my problem?


Thnx,


-Rick

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion