fax over fxs/fxo

Unanswered Question
Apr 26th, 2007
User Badges:

hello does the regular fxo/fxs dial-peer configuration configuration will allow us to fax without the need additional config? example configuration from you are welcome. tx :)

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Paolo Bevilacqua Fri, 04/27/2007 - 02:18
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Yes, no additional configuration is necessary.

jemekeren Fri, 04/27/2007 - 21:22
User Badges:

yup. tx for reply. i forgot to inform you that i use vad option and low bandwidth codec. so far my fax transmission is unsucessful. i am afraid to make changes that could make impact on the network performance. my question is does the codec could make the fax disabled? or it is the vad? tx

Paolo Bevilacqua Sat, 04/28/2007 - 00:19
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi,


do you have fxo/fxs in the same router ? In this case, there is no vad neither codec. The only thing you can try is adjusting the fxo impedance arccording to the following document:

http://cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080477a06.shtml


As a courtesy to those providing answers, please rate all useful posts

Actions

This Discussion