cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
331
Views
0
Helpful
1
Replies

VPN3K L2L Netscreen with X.509

vgrote
Level 1
Level 1

Hi all,

we try to establish a site-to-site vpn with VPN3015 and Netscreen Firewall with

RSA Certificates.The tunnel comes up, if it is initiated by the side of Netscreen,

but it fails when the VPN3K tries to open it.Here is what we see in the Netscreenlog :

IKE<-.-.-.- > Process [ID]:

IKE<-.-.-.- > ID received: type=ID_DER_ASN1_DN, DN = Email=... CN=...,OU=...,O=...,C=..., port = 0, protocol=0

IKE<-.-.-.-> Received incorrect ID payload: ID type mismatch.

IKE<-.-.-.-> ID processed. return 1. sa->p1_state = 2.

IKE<-.-.-.-> Error processing ID

IKE<-.-.-.- > Phase 1: Main mode

negotiations have failed.

The Netscreen is awaiting to get the ID type ID_FQDN,but the VPN3K sends the ID ID_DER_ASN1_DN. We also changed the value of the DN Field in Configuration|Usermanagement|Groups|IPSec,but nothing changed.How will it possible to send the right ID to Netscreen ?

Thanks and regards

Volker

1 Reply 1

drolemc
Level 6
Level 6

Try using ip address instead of DN and see if it works.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: