04-27-2007 09:34 PM - edited 03-03-2019 04:45 PM
Hello,
I have 2811 series router running IP base IOS, later I added VOICE supporting IOS and reload the router.
now the router doesnt boot ; just freezes
Please let me know the steps to restore the router in working mode?? Will I lose my configuration on the router.
Details of router
Cisco 2811 (revision 53.50) with 251904K/10240K bytes of memory
flash:c2800nm-ipbase-mz.124-3d.bin
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)
04-27-2007 10:52 PM
Hi there,
Have you removed the old IOS (IP Base), after add the new Voice IOS ?
BR,
Mohammed Mahmoud.
04-28-2007 06:03 AM
I cannot get the prompt to delete
What steps are required?
04-28-2007 08:15 AM
Hi,
Thanks God you didn't remove it.
First: reload the router and do a break sequence to enter rommon mode:
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a0080174a34.shtml
Second: dir your flash to get the old IP-Base IOS exact name:
http://www.cisco.com/en/US/products/ps5854/prod_configuration_guide09186a00802c35e9.html#wp1066200
Third: boot the router using the old IP-Base image:
http://www.cisco.com/en/US/products/ps5854/prod_configuration_guide09186a00802c35e9.html#wp1064046
HTH, please rate if it does help,
Mohammed Mahmoud.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: