Performance Solution

Unanswered Question
Apr 28th, 2007
User Badges:

Hello,


I have a Server with Two NIC.


One of the NIC of the Server is connected to 4500 Ethernet Module.


To improve the performance of the Server I would like connect the second NIC.


What is the best possible solution/configuration?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
royalblues Sat, 04/28/2007 - 08:07
User Badges:
  • Green, 3000 points or more

Friend,


You can configure etherchannel between the server and the switch by connecting another cable between the two.

http://www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a008014edfa.shtml


you can also configure teaming with the 2 NICs

http://h18006.www1.hp.com/products/servers/management/rdp/knowledgebase/00000108.html


HTH, rate if it does

Narayan

Amin Shaikh Sat, 04/28/2007 - 21:27
User Badges:

Thanks.


Using Etherchannel option what configuration is required on the Server Two nic.


Will there be Two IP address assigned on the server. { One IP for each interface }


some of my applications are hardcoded IP address.



Actions

This Discussion