cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
302
Views
0
Helpful
2
Replies

Management VLAN

tafeitsi1
Level 1
Level 1

Hi wondering if someone can help me out with this one. I have a Cisco 3560 layer 3 switch on which I have setup a number of vlans and their corresponding ips. All are functioning except the management vlan - 10. I cannot ping my management vlan from any device within or without the network. A sho ip route command doesnt sho a route for vlan 10 but it does for the others. I have assigned a valid ip address to it and its not shutdown. Any ideas of what I need to do to get it working? Thks in advance.

2 Replies 2

mahmoodmkl
Level 7
Level 7

Hi

First is the interface UP.

Check that atleast one port is active in that vlan on that switch or it has a trunk link and the vlan 10 is allowed on it.

Thanks

Mahmood

Hi Mahmood

Thanks for the fast reply. Yep been there done that :-) It all looks to be singing and dancing except that it hardly breaks a slow walk. Robyn.

Review Cisco Networking products for a $25 gift card