Paolo Bevilacqua Mon, 04/30/2007 - 02:32
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Yes. Note, dialer map is only for outgoing calls. If you are using a central router to receive ISDN calls for back-up from branches, you don't need dialer map.


Hope this helps, please rate all useful posts using the scrollbox below!

dragec Mon, 04/30/2007 - 06:25
User Badges:

but dialer map can also handle incoming calls. what other technology would you recomend for handlink incoming 400 locations?

Paolo Bevilacqua Mon, 04/30/2007 - 06:47
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi,


My point is that to receive calls, is not necessary to configure dialer map, because the router will create a dynamic dialer map when it receive the call. This is due to IPCP in PPP.

Of course, if you want to be able to generate the call, you will need dialer map statement.


As a courtesy to those providing answers, please rate posts using the scrollbox below!


Actions

This Discussion