NI2 PRI 7 Digit local calling

Unanswered Question
Apr 30th, 2007
User Badges:

I am having trouble with a PRI making outbound local 7-digit calls. I have a PRI connected to ccm with MGCP protocol. I can dial 10 digit (area code plus number) fine, but am getting rejected when using 7.

According to Telco, I should have the ability to dial either / or. Any ideas?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (2 ratings)
Brandon Buffin Mon, 04/30/2007 - 06:46
User Badges:
  • Purple, 4500 points or more

Do you have a route pattern in place for 10 digit such as 9.[2-9]XX[2-9]XXXXXX and are you stripping the 9 before sending the call?


hauchinango Mon, 04/30/2007 - 07:26
User Badges:


I was using the 9.@ pattern. I created a 9.[2-9]xxxxxx pattern for 7 digit local and it works.


lfulgenzi Mon, 04/30/2007 - 15:23
User Badges:
  • Silver, 250 points or more

For 7 digit dialing to work with 9.@ patterns you need to add a route filter which has the clause "local area code does not exist". This will prevent 10 digit dialing so you will need to add another 9.@ pattern or a similar route pattern with wildcards.


This Discussion