TSP update from 7.0(4) to 8.13) issues on 4.0(4) SR 1

Unanswered Question
Apr 30th, 2007
User Badges:
  • Silver, 250 points or more


Any one seen issues where calls do not answer after rebooting after TSP update from 7.0(4) to 8.1(3) ? We rebooted twice and second boot also did not get calls answered. The VM ports were all registered, etc. The error below is only thing in event log since boot up. We got it working by stopping unity from system tray icon and starting it from system tray but have not tried another reboot yet to see if all starts up fine and unit answers call fine on reboot on it's own.

Event Type: Error

Event Source: CiscoUnity_TSP

Event Category: None

Event ID: 158

Date: 4/30/2007

Time: 8:14:37 AM

User: N/A



Cisco Unity-CM TSP device 7 (Cisco Unity port 4): Unexpected state transition requested. This Cisco Unity port may be in an undefined state. Requested state = <Idle>. Current state = <Wait For Answer Requested>.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion