cat4000-i9s-mz.121-19.EW1.bin

Unanswered Question
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (5 ratings)
Loading.
Amit Singh Tue, 05/01/2007 - 09:51
User Badges:
  • Cisco Employee,

Hi Ali,


I would suggest to use SSO with NFS between the supervisor engines. SSO/NSF give you sub-milisecond fail-over between the sup's for both L2/L3 failover though we claim it around 0-3 seconds which depends on the traffic flow. My self has tested same with 900Mbps traffic and the failover time was arnd 300 milisecond.


You need atleaset 12.2.31SG for the same.


http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/12_2_31s/conf/nsfwsso.htm


HTH,

-amit singh

Amit Singh Wed, 05/02/2007 - 00:50
User Badges:
  • Cisco Employee,

Hi Ali,


This is the full image name that you need on the box :


cat4500-ipbase-mz


HTH,

-amit singh

Actions

This Discussion