address translation on router

Unanswered Question
May 1st, 2007
User Badges:

How to achieve the following. What are the commands i could use to achieve this?


scenario;


PCin-----(e1)router(e0)--------PCout


requuirement;

1. any traffic that comes from PCin directed to the router should be translated to the ip address of e0.


2.any traffic that is coming from PCout going to eo should be translated to ip address of PCin.



Thanks a lot.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mohammedmahmoud Tue, 05/01/2007 - 14:27
User Badges:
  • Green, 3000 points or more

Hi,


You can do both NAT inside and NAT outside, having e1 as the inside interface and e0 as the outside interface, its something as in this document:


http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a0080093f30.shtml


Please don't hesitate for further questions.


HTH, please rate if it does help,

Mohammed Mahmoud.

Actions

This Discussion