VPN Conentrator 3005 Console/Admin

Unanswered Question
May 1st, 2007
User Badges:

I need help!! I cannot connect to my console port via HyperTerm. I have all the settings per the doc: 8-N-1-Hardware. I've been able to connect to another 3005 with the same cable. The reason I need to connect it is to perform an Admin reset as I do not have full authorization via Concentrator Manager or menus. Please HELP!!


Thanks


Scott

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
adgzer0106 Wed, 06/27/2007 - 05:02
User Badges:

hi,


Did you ever get round this? As I have exactly the same problem.


Cheers

Andy

skumpf Wed, 06/27/2007 - 05:22
User Badges:

Hello,


Yes we did. Actually, it came down to having the appropriate console cable. As there are many different Cisco console cables not all have the same pin-out. Unfortunatley I was not on-site and had to depend on a Technician to verify the actuall cable type. There is a specific cable to the VPN concentrators. A switch or router console cable will not work.


Hope this helps. Good Luck,

Actions

This Discussion