05-02-2007 12:17 AM - edited 03-11-2019 03:08 AM
Hello,
I have 1 problem in configuration which normally worked on PIX 6.3(1) but showing Warning message during implementation on ASA.
I have 2 statics:
static (dmz,outside) tcp XXX.XXX.XXX.XXX 8080 YYY.YYY.YYY.YYY 8080 netmask 255.255.255.255 0 0
static (inside,outside) tcp XXX.XXX.XXX.XXX https ZZZ.ZZZ.ZZZ.ZZZ https netmask 255.255.255.255 0 0
Public ip XXX.XXX.XXX.XXX is the same, private ips in inside and dmz is different
The second static ASA not allowing me to enter: Warning: conflict with previous static
On Pix 515 v.6.3(1) this configuration worked very well.
Is there any trick to start this work??
Thanks. Alex
05-02-2007 04:45 AM
Do you have another static with ZZZ.ZZZ.ZZZ.ZZZ?
05-02-2007 04:53 AM
ZZZ.ZZZ.ZZZ.ZZZZ is internal ip, there is no any other static configured for it.
Error showing problem of XXX.XXX.XXX.XXX IP address conflict
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide