LMS 2.6 - DCR Database - Device name and state problem

Unanswered Question
May 2nd, 2007

Hello

I have imported the devices im CW LMS 2.6 from a old 2.2 installation (via csv file)

For the CServices the devices are OK.

For the DCR the devices are in Questioned state.

Info:The DNS device name of devices is device.network.company.com

but the CW is just in company.com domain.

Into the DCR the devices appears with device. (with ".") name instead device.network.company.com.

I have correct the following data into the "CS Device and Credential" database:

- Add IP address

- Domain: network.company.com

And It seems the problem resolved.

DCR Question: Is this the only way to have the correct name (and Known state) into the DCR?

..I have 300 devices to modify..

Best Regards

Andrea

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
acalligher Thu, 05/03/2007 - 22:48

Hello

The problem was related to the missing IP parameter into the CS Devices Database.

I add the IP address and now is ok

For the name resolution into the DFM it was necessary do add the "ip domain-name" command into the devices. After that the name was correcty directy by the DFM.

Best Regards

Andrea

Actions

This Discussion