cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
284
Views
0
Helpful
1
Replies

Radio Switchport won't come up

imuonagor
Level 1
Level 1

Hi, we have an enterprise campus made up of 3 buildings. We recently installed a wireless bridge/radio (Tranzeo) to connect two of the buildings. The Radio is terminated on a 2950 switch at the main building. The problem is that when we power up both the Radio and 2950 Switch, the Radio's switchport doesn't come up after the Switch completes its power on process. But if you power the Radio off and on again (with the Switch already on) the port comes up. We have tried adjusting the duplex and speed settings on both the Radio and Switch but the problem persists. Please assist. Thanks a million.

1 Reply 1

b.hsu
Level 5
Level 5

You can configure your access point as a root device that is connected to the wired LAN or as a repeater (non-root) device that is not connected to the wired LAN.

If you want to know more please click following URL:

http://www.cisco.com/en/US/docs/wireless/access_point/12.2_11_JA/configuration/guide/s11rf_ps430_TSD_Products_Configuration_Guide_Chapter.html

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: