Rob Huffman Wed, 05/02/2007 - 08:13
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Tom,


It looks like support for the 7906 (and 7921) was added in SRST v4.1. Have a look;


The following IP phones are supported by Cisco SRST 3.3:


Cisco Analog Telephone Adaptor (ATA) 186 and Cisco ATA 188 Version 2.16 and higher with Cisco CallManager 3.3 and higher


Cisco SRST supports Cisco ATA 186 and Cisco ATA 188 using Skinny Client Control Protocol (SCCP) for voice calls only


Cisco IP Phone 7902G


Cisco IP Phone 7905G


Cisco IP Phone 7910


Cisco IP Phone 7912G


Cisco IP Phone Expansion Module 7914


Cisco Wireless IP Phone 7920


Cisco IP Conference Station 7935


Cisco IP Conference Station 7936


Cisco IP Phone 7940 and Cisco IP Phone 7940G


Cisco IP Phone 7960 and Cisco IP Phone 7960G


Cisco IP Phone 7970G


Cisco IP Phone 7971G-GE




It also doesn't show the 7906 in here;


http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2169/prod_installation_guide09186a00805f6f1b.html


It does show the 7906 added in SRST 4.1 (See Table 3)


http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_data_sheet0900aecd805e1e79.html


Hope this helps!

Rob

Actions

This Discussion