gogasca Wed, 05/02/2007 - 09:18

http://www.cisco.com/en/US/partner/products/hw/phones/ps379/products_administration_guide_chapter09186a00805ea0e5.html#wp1089459

The way CCM 5.x is setup the directory structure of tftp is predefined as there is no access to create folders. The directories will not be shown in the tftp uploaded files list if they are empty.

The action plan will be for you to upload the files with the following

information,

1) From the tftp file upload page in OS admin use :-

File : .png

Subdirectory of TFTP : Desktops/320x196x4 (this directory is

valid for 7941 and 7961 IP Phones)

mymite060708 Fri, 05/04/2007 - 06:04

hi thanks for that. Can I just check my settings then

I have created the two files

img1.png = full size image for phone

img1sm.png = Thumbnail picture

I have then uploaded these to: Desktops/320x196x4

Then I created the following List.xml file

FTP:Desktops/320x196x4/img1.png"

URL="TFTP:Desktops/320x196x4/img1.png"/>

Then I upload this to the same dir: Desktops/320x196x4

Is that all I need to do?

Thanks

Actions

This Discussion