05-03-2007 03:11 AM - edited 02-21-2020 03:01 PM
Hi,
I am running a 3005 Concentrator with vpn3005-4.7.2.I-k9.bin software vers. However when i attempt to install new ssl vpn client on 3005, file transfer go until 74% than stops. And i have heard that software vers. vpn3005-4.7.2.I-k9.bin which i am running, it is preloaded with ssl client and you have to just enable it. But i don't have suche option. Any help would be appreciated.
Sfanayei
05-09-2007 09:58 AM
This issue may occur if the hardware requirements for SSL vpn client are not met. Following link may help you
http://www.cisco.com/univercd/cc/td/doc/product/vpn/vpn3000/4_7/47con3k.htm#wp28723
05-09-2007 10:20 PM
Hi,
That was it. I just needed som more memory.
Tnaks a lot.
Sfanayei
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: