UdpJitter(codec) configuration using SNMP

Answered Question
May 3rd, 2007
User Badges:

Hi,

Who can told me order of setting objects for UdpJitter(codec)operation?

For example following is order of setting objects for UdpJitter without codec:

rttMonCtrlAdminRttType.<index> -Integer 9

rttMonEchoAdminProtocol.<index> -Integer 27

rttMonEchoAdminTargetAddress.<index> -OctetString "05 00 00 02"

rttMonEchoAdminTargetPort.<index> -Integer 8000

rttMonEchoAdminInterval.<index> -Integer 20

rttMonEchoAdminNumPackets.<index> -Integer 100

rttMonCtrlAdminStatus.<index> -Integer 4

rttMonScheduleAdminRttStartTime.<index> -TimeTicks 1


Thanks ahead

Correct Answer by Joe Clarke about 10 years 2 months ago

You can insert the rttMonEchoAdminCodecType just before rttMonCtrlAdminStatus. However, you cannot specify rttMonEchoAdminPktDataRequestSize, rttMonEchoAdminInterval, or rttMonEchoAdminPackets if you specify a codec. See the CISCO-RTTMON-MIB for more details.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Joe Clarke Thu, 05/03/2007 - 09:05
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

You can insert the rttMonEchoAdminCodecType just before rttMonCtrlAdminStatus. However, you cannot specify rttMonEchoAdminPktDataRequestSize, rttMonEchoAdminInterval, or rttMonEchoAdminPackets if you specify a codec. See the CISCO-RTTMON-MIB for more details.

Actions

This Discussion