05-03-2007 12:37 PM - edited 03-05-2019 03:51 PM
Anyone experience the error, java.lang.NullPointer when trying to load Cisco View Device Manager on a 6509-E?
Running: 122-18.SXF8
Tried both CVDM version: cvdm-c6500-1.1.tar & cvdm-c6500-1.1_K9.tar
Have Java installed: 1.4.2_06
Solved! Go to Solution.
05-04-2007 09:32 AM
Hi.
I believe you're hitting a known bug:
CSCsc10956 - CVDM 1.1 does not work with 12.2(18)SXF
Release-note: CVDM 1.1 does not work after logging in on a Sup720 running IOS version 12.2(18)SXF within a 6500 switch.
I do see that there may be a patch for this issue, for which you would need to open a TAC case to obtain. Otherwise there is the following workaround:
Workaround: Downgrade the IOS software to 12.2(18)SXD3.
HTH,
-Joe
05-04-2007 09:32 AM
Hi.
I believe you're hitting a known bug:
CSCsc10956 - CVDM 1.1 does not work with 12.2(18)SXF
Release-note: CVDM 1.1 does not work after logging in on a Sup720 running IOS version 12.2(18)SXF within a 6500 switch.
I do see that there may be a patch for this issue, for which you would need to open a TAC case to obtain. Otherwise there is the following workaround:
Workaround: Downgrade the IOS software to 12.2(18)SXD3.
HTH,
-Joe
09-11-2007 04:27 PM
I'm finding this same problem. Months after this bug has been posted. I'm new to the 6500 so I am unsure about the pros and cons of downgrading to this older version of IOS.
I'm installing a brand new 6509E. Does anyone have any advice on this?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: