05-03-2007 12:37 PM - edited 03-05-2019 03:51 PM
Anyone experience the error, java.lang.NullPointer when trying to load Cisco View Device Manager on a 6509-E?
Running: 122-18.SXF8
Tried both CVDM version: cvdm-c6500-1.1.tar & cvdm-c6500-1.1_K9.tar
Have Java installed: 1.4.2_06
Solved! Go to Solution.
05-04-2007 09:32 AM
Hi.
I believe you're hitting a known bug:
CSCsc10956 - CVDM 1.1 does not work with 12.2(18)SXF
Release-note: CVDM 1.1 does not work after logging in on a Sup720 running IOS version 12.2(18)SXF within a 6500 switch.
I do see that there may be a patch for this issue, for which you would need to open a TAC case to obtain. Otherwise there is the following workaround:
Workaround: Downgrade the IOS software to 12.2(18)SXD3.
HTH,
-Joe
05-04-2007 09:32 AM
Hi.
I believe you're hitting a known bug:
CSCsc10956 - CVDM 1.1 does not work with 12.2(18)SXF
Release-note: CVDM 1.1 does not work after logging in on a Sup720 running IOS version 12.2(18)SXF within a 6500 switch.
I do see that there may be a patch for this issue, for which you would need to open a TAC case to obtain. Otherwise there is the following workaround:
Workaround: Downgrade the IOS software to 12.2(18)SXD3.
HTH,
-Joe
09-11-2007 04:27 PM
I'm finding this same problem. Months after this bug has been posted. I'm new to the 6500 so I am unsure about the pros and cons of downgrading to this older version of IOS.
I'm installing a brand new 6509E. Does anyone have any advice on this?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide