URL time out

Unanswered Question
May 4th, 2007

Hi,

I am having an issue to connect to url through CSS on web server, but I can access it locally.

Any thing wrong with my config,

service AA-webAdvertising-2

ip address 10.194.17.129

protocol tcp

port 80

keepalive type tcp

keepalive port 80

active

content AA-webAdvertising-2

add service AA-webAdvertising-2

protocol tcp

port 80

url "/nie/*" dql x.y.z

vip address 10.194.17.120

advanced-balance sticky-srcip

no persistent

flow-timeout-multiplier 300

active

"sh con "

SFP: 1/1 Index: 386 <10.194.17.120> TCP Port 80 Streamed

WWW.x.y.z.CO.UK/nie/index.php

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Syed Iftekhar Ahmed Fri, 05/04/2007 - 10:35

Where is the client? Is it in the same subnet where real servers are? If yes then you will have to source nat the traffic to make sure that the return traffic doesnt bypass CSS.

If thats not the case, Make the content rule simple (remove url under content rule or use url "/*") and check if it works.

Syed

Actions

This Discussion