SSID and Vlans

ricardorojas123 · ‎05-04-2007

I can to have two SSIDs for all branch of my country, but each ones in a differents subnets,for example:

Area 1

SSID 1 : guest -> 192.168.1.1

SSID 2 : office -> 192.168.2.1

Area 2

SSID 1 : guest -> 192.168.3.1

SSID 2 : office -> 192.168.4.1

I have configured AP-Group, and this works succesfull but only with one SSID, I need two SSID, each one associated a multiples vlans, when the user are connect to SSID guest they receive the correct ip from the subnet corresponding,(Area1 ip address of host is 192.168.1.X and the Area 2 the usuer receibe the address 192.168.3.X both using the same SSID "guest"), How I can reach this requerimients using two SSID?. Using Ap-Group or there is other methods.

Report Inappropriate Content · ‎05-10-2007

AP Group VLANs are used in a setup where a Universal WLAN (service set identifier [SSID]) is required but clients need to be differentiated (placed on different interfaces configured on the WLC) by virtue of physical LAPs they associate with. Refer URL

http://cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml#c2