05-04-2007 02:11 PM - edited 07-03-2021 02:02 PM
I can not find on Cisco's website what version of code must be on my 3825 router to support the NM-AIR-WLC6-K9. Currently c3825-ipbase-mz.124-3g.bin is on the router and it does not recognize the controller. Also are there any sample configurations. I have to have this up before Monday. Once the router sees it I will add it to our WCS server.
05-06-2007 07:52 AM
Hi Todd,
Sorry for the lateness in this reply but I thought I would add this just in case;
Routers: Cisco IOS Software Release 12.4(3)T and later (from what I have read the T is very important)
From this doc;
Cisco Wireless LAN Controller Modules
http://www.cisco.com/en/US/products/hw/modules/ps2797/products_data_sheet0900aecd80364432.html
Hope this helps!
Rob
05-08-2007 12:32 PM
Thanks for the help. After a reboot onto 12.4(11)T the router sees the controller and I am configuring as we speak. I will then add it to the WCS server and everything should be pretty straight forward from there. Thanks again for your help.
06-10-2007 12:13 PM
I too have a Cisco 3825 Router with 12.4(13b) Advanced IP Services and it does not see the controller. Any ideas?
06-11-2007 04:51 AM
Hi David,
Routers: Cisco IOS Software Release 12.4(3)T and later **(from what I have read the T is a must)** When Todd used 12.4(11)T the 3825 recognized the controller
From this doc;
Cisco Wireless LAN Controller Modules
http://www.cisco.com/en/US/products/hw/modules/ps2797/products_data_sheet0900aecd80364432.html
Hope this helps!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: