05-04-2007 04:39 PM - edited 03-05-2019 03:52 PM
I have a terminal server router of which cable number 4 and 5 i have connected to my PC at the serial port. however when try to do telnet iam not able to get the console.
when i try to do telnet 10.201.200.15 2035 it return an error connection refused
here is my configuration file
****************** configuration ***
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname ts-cluster-c
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$V5Nu$RGD3V1a3dJyh4Q6/7NFtH1
enable password eskimo66
!
no network-clock-participate slot 1
no network-clock-participate wic 0
no aaa new-model
ip subnet-zero
no ip routing
no ip cef
!
!
!
no ftp-server write-enable
!
!
!
!
interface FastEthernet0/0
ip address 10.201.200.15 255.255.255.0
no ip route-cache
duplex auto
speed auto
no mop enabled
!
interface Group-Async0
physical-layer async
no ip address
no group-range
!
ip default-gateway 10.201.200.1
ip classless
ip http server
!
!
line con 0
line 33 48
line aux 0
line vty 0 4
password cisco
login
!
!
!
end
Solved! Go to Solution.
05-04-2007 09:36 PM
Hi,
You need the following:
under the async interface:
--> physical-layer async
--> async mode interactive
under the async TTY line(s) (33-48):
--> transport input telnet
--> stopbits 1
Plus make sure that the interface you are using its ip for the reverse telnet is up/up, and its recommended to use a loopback interface for this issue.
HTH, please rate if it does help,
Mohammed Mahmoud.
05-04-2007 09:36 PM
Hi,
You need the following:
under the async interface:
--> physical-layer async
--> async mode interactive
under the async TTY line(s) (33-48):
--> transport input telnet
--> stopbits 1
Plus make sure that the interface you are using its ip for the reverse telnet is up/up, and its recommended to use a loopback interface for this issue.
HTH, please rate if it does help,
Mohammed Mahmoud.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide