Connectivity problems after IOS Upgrade

Unanswered Question
May 4th, 2007
User Badges:

Hi


I just updated two 1130AG to the latest IOS (12.4.x).


Now I always have disconnects several times in minute.


One 1130ag is the root ap, the other is configured as workgroup-bridge.


On the workgroup-bridge the radion interface didn't come up, it is in reset status --> reporting in the log: got receive response from root ap.


An the clients which connect directly tho the root ap, have this disconnects several times in a minute. Reporting in the log: client has left bssid.


But it is definitly not the client because they working perfect on other ap's.


Configuration for clients is wpa-psk on the radio 0.

Configuration beetween root ap and workgroup-bridge is leap on the radio 1.


Someone recognize the same problems?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
brispin Thu, 05/10/2007 - 11:19
User Badges:

After upgrade do a hard reset for a minute and then reconfigure both the AP and the workgroup bridge.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode