ce 500 switch raoming issue for wireless clients

Unanswered Question
May 5th, 2007

Hi

i am working at a site with 4 1230 aironet access points & 1 ce 500 switch , there is no encryption / no authentication configured , all the devices are in the same vlan , the client devices are able to get the dhcp addresses & they get registered with the access points but as soon as the client device roams from one ap to another the netwotk connetivity is lost , a cisco documentation states to get the smartports configured as switches but that doesnt work at the same time bcos we have no encryption / authentication configured WDS doesnt come into picture , when i replace this ce 500 with a 2950 evrything seems to be perfect , please help because i have to deploy this network using a ce 500.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
tchacko Sat, 05/12/2007 - 22:55

Hi

The problem has been taken care of by configuring the smartports as others & getting arp inspection disabled

Actions

This Discussion