cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
290
Views
0
Helpful
1
Replies

ce 500 switch raoming issue for wireless clients

pankajkulkarni
Level 1
Level 1

Hi

i am working at a site with 4 1230 aironet access points & 1 ce 500 switch , there is no encryption / no authentication configured , all the devices are in the same vlan , the client devices are able to get the dhcp addresses & they get registered with the access points but as soon as the client device roams from one ap to another the netwotk connetivity is lost , a cisco documentation states to get the smartports configured as switches but that doesnt work at the same time bcos we have no encryption / authentication configured WDS doesnt come into picture , when i replace this ce 500 with a 2950 evrything seems to be perfect , please help because i have to deploy this network using a ce 500.

1 Reply 1

tchacko
Level 5
Level 5

Hi

The problem has been taken care of by configuring the smartports as others & getting arp inspection disabled

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco