Voice Port stay Up when transfer to PSTN

Unanswered Question
May 7th, 2007

Hello guys, i have a problem,

When i try to forward my Phone to PSTN my voice port stay UP and never hang up.

0/0 -- fxo-ls up up idle off-hook y

0/1 -- fxo-ls up up idle off-hook y

What can i do to resolve this issue.

Regards.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Brandon Buffin Mon, 05/07/2007 - 07:25

If you receive a call from the PSTN to your phone and have your phone forwarded to a PSTN number, it is normal behavior for these 2 ports to stay active for the duration of the call. If the ports are not disconnecting after the call is terminated, take a look at the following link for cause of this problem and possible solutions.

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml

Hope this helps. If so, please rate the post.

Brandon

robert.bernal Mon, 05/07/2007 - 07:50

Thanks bbuffin, Its done I use commands

battery-reversal

no supervisory disconnect signal

Now, when tha call is over, it self dissconect and comes down.

Thanks for your help.

Actions

This Discussion