05-07-2007 11:34 AM - edited 07-03-2021 02:02 PM
I am deploying 400 new APs. There is an existing wireless network. I need to turn up some of the radios before I turn up the rest. Right now I have 802.11b/g network turned off globally across all controllers. What I want to know is can I enable 802.11b/g radios selectively on individual APs or does it have to be done globally across the controller?
Thanks.
05-07-2007 12:26 PM
Yes you can...wireless/access points/b/g radios/configure
05-07-2007 12:32 PM
Thanks, but the Operational Status is still down. (Presumably because I have 802.11b/g disabled globally). Is there a way to override the global setting for individual APs?
05-07-2007 10:59 PM
Hi Friend,
The only workaround is globally enable for all APs and manually admin down for respective APs for b/g radio. I agree its a tough job when you have 400 APs but if you can run some script it will be a matter of seconds.
And if you have WCS you can use AP template for that purpose which again will take less time than manual work.
Regards,
Ankur
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide