CBS3020 fiber trunking problem

Unanswered Question
May 7th, 2007
User Badges:
  • Bronze, 100 points or more

I am having terrible luck getting 2 seperate HP blade enclosures to trunk with 4507R's via fiber. Both of my blade enclosures have 2 CBS3020's inside. On one enclosure I was able to get one of the switches to trunk with the 4507R over fiber, but the other link still shows down/down on the 4507 end.


On the CBS3020 end I see it as connected, and the switch is incrementing it's output counters on the interface, but on the 4507 the link is down/down.


Any help would be appreciated.


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
irisrios Fri, 05/11/2007 - 12:31
User Badges:
  • Silver, 250 points or more

The Trunk Failover feature allows rapid failover to the redundant switch. The Trunk Failover feature allows rapid failover to the redundant switch in the blade enclosure if all uplinks from the primary switch fail

If you want to know more please click the following link:


http://cisco.com/en/US/products/ps6748/products_data_sheet0900aecd80535935.html

Actions

This Discussion