VPN user obtaining 1 IP address

Answered Question
May 7th, 2007
User Badges:

the bulk of our VPN users obtain an IP address via the ip local pool command. So in that command we've setup a pool of IP's in which a VPN user dips into to get an IP.

Well, now we have an app that we would like to use vpn similar to above. BUT we would like for the app to use just one IP.

we thought about creating a pool with just 1 IP. But I'm not sure if that will be the best method.

Any ideas?


Correct Answer by ggilbert about 10 years 1 month ago

Gary -


The device which will be assigning the IP address would be the concentrator.


And the device to which the IP address will be assigned to, would be the VPN client.


Cheers

Gilbert

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
ggilbert Mon, 05/07/2007 - 14:43
User Badges:
  • Cisco Employee,

Gary,


What is the head end device these VPN users are connecting to ?


Concentrator or ASA?


Are they authenticated using internal authentication or RADIUS authentication?


Please let me know.


Thanks

Gilbert

garyrivers Tue, 05/08/2007 - 05:20
User Badges:

they are connecting to a concentrator and authenticating interally.

ggilbert Tue, 05/08/2007 - 05:40
User Badges:
  • Cisco Employee,

Gary,


If that is the case, you can assign a particular IP address to the user in the user settings.


Configuration | User Management | Users


Choose the user - click on Modify, specify the IP address which needs to be assigned to the user.


Rate this post, if it helps.


Cheers

Gilbert



Correct Answer
ggilbert Tue, 05/08/2007 - 08:56
User Badges:
  • Cisco Employee,

Gary -


The device which will be assigning the IP address would be the concentrator.


And the device to which the IP address will be assigned to, would be the VPN client.


Cheers

Gilbert

Actions

This Discussion