05-07-2007 03:26 PM - edited 03-09-2019 05:56 PM
hi,
when i add a new CAS to the CAM server ,i receive this message "Could not add Clean Access Server!" what can be the problem
thanks
05-07-2007 11:48 PM
Have you tried synchronizing your clock. The clock in the CAM and CAS have to be similar.
-Hoogen
Do rate if this helps :)
05-10-2007 02:05 AM
thank you for your response , i do it but i have the seem problem .
thanks
05-10-2007 05:23 AM
Verify they can ping each other. Besides that, I know what really got us was the fact that the CAM and CAS must be on separate networks. Check those two things.
-Mike
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide