Originating Calling Number for CUE

Unanswered Question
May 7th, 2007

Hi all,

Let me explain my issue.

Here is a ephone-dn configuration on my CME:

ephone-dn 52

number 49

description JD

name JD

call-forward all 20

hold-alert 30 originator

So If someone (from PSTN) is calling the 00352XXXXXX49, the call is redirected to the extension 20 (due to CFWALL), and then the 20 get the call, it shows on the screen the Original Calling number (PSTN) and the first called number and name (49 and JD) also.

So, this is working fine. Now we just added a CUE to redirect all call through a Welcome message (AA from CUE) and then transfer the call to extension 20. So if someone call extension 49 from PSTN, it will go to extension (99 ==> AA), play a prompt, and then transfer to 20.

Here is now my ephone-dn

ephone-dn 52

number 49

description JD

name JD

call-forward all 99

hold-alert 30 originator

Here is the problem. When 20 is ringing, it only shows the PSTN Number (orginating calling number). And I'd like that all parameter like before could be shown on the screen.

If someone has an idea...

Thx u for this.


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
ebreniz Mon, 05/14/2007 - 05:54

Check whether calling-number local" which is issued under telephony-service that would cause calls that are forwarded to show the forwarding phone's number not the originating sides.

f.giordano Tue, 05/15/2007 - 01:00


It doesn't change anything...

here is my Telephony-service configuration:

CME_2811#sh telephony-service

CONFIG (Version=4.0(3))


Version 4.0(3)

Cisco Unified CallManager Express

For on-line documentation please see:


ip source-address port 2000

load ata ATA030100SCCP040211A.zup

load 7920 cmterm_7920.4.0-02-00

load 7936 cmterm_7936.3-3-5-0

load 7970 TERM70.7-0-3-0S

load 7914 P0030702T023

load 7960-7940 P0030702T023

max-ephones 40

max-dn 144

max-conferences 4 gain -6

dspfarm units 0

dspfarm transcode sessions 0

hunt-group report delay 1 hours

hunt-group logout DND

max-redirect 5

voicemail 89

cnf-file location: system:

cnf-file option: PER-PHONE-TYPE

network-locale[0] FR (This is the default network locale for this box)

network-locale[1] US

network-locale[2] US

network-locale[3] US

network-locale[4] US

user-locale[0] FR (This is the default user locale for this box)

user-locale[1] US

user-locale[2] US

user-locale[3] US

user-locale[4] US

srst mode auto-provision is OFF

srst ephone template is 0

srst dn template is 0

srst dn line mode is single

mwi relay

moh music-on-hold.au

time-format 24

date-format dd-mm-yy

timezone 0 Greenwich Standard Time

secondary-dialtone 0

no call-forward pattern is configured.

transfer-pattern 0T

transfer-pattern ..

keepalive 30

timeout interdigit 5

timeout busy 10

timeout ringing 180

caller-id name-only: enable

system message xxxxxx

web admin system name admin password xxxxxxx

web admin customer name cusadmin password xxxxxxx

edit DN through Web: enabled.

edit TIME through web: enabled.

calling-number local

Log (table parameters):

max-size: 150

retain-timer: 15

create cnf-files version-stamp Jan 01 2002 00:00:00

transfer-system full-consult

local directory service: enabled.

testing xml apis

Extension-assigner tag-type ephone-tag.

Thx for your help



This Discussion