Generating a test call on an ISR

Answered Question
May 8th, 2007

I recall a command (not listed) that allows you to tell an ISR to make an actual call, as if a voice call was being sent to the router.

Does anyone know this command?

I have this problem too.
0 votes
Correct Answer by kelvin.blair about 9 years 8 months ago

As everyone has said "csim start". It is a very useful tool, but you'll need to make sure you have dialpeers created to match or it want work.

Correct Answer by Brandon Buffin about 9 years 8 months ago

The command is "csim start".

Hope this helps. If so, please rate the post.

Brandon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (4 ratings)
Loading.
Correct Answer
Brandon Buffin Tue, 05/08/2007 - 10:55

The command is "csim start".

Hope this helps. If so, please rate the post.

Brandon

Correct Answer
kelvin.blair Tue, 05/08/2007 - 11:15

As everyone has said "csim start". It is a very useful tool, but you'll need to make sure you have dialpeers created to match or it want work.

Actions

This Discussion